Inside Your Printer - Konica Minolta magicolor 7300 Reference Manual

Inside Your Printer

Your printer's Operating System software resides inside the printer and is
referred to as printer firmware. The printer firmware is stored in flash ROM on
a Smart Media card.
Updating new printer firmware is performed via one of the printer's interfaces.
When the printer firmware is downloaded to the printer, the printer recognizes
the nature of the code and replaces the older firmware with the new one that
is downloaded. After downloading, the printer restarts with the new printer
firmware resident and active.
When your printer is switched on, by default it prints a start page. This page is
generated internally by the Operating System. Below is a list of the
information pages that may be printed by the Operating System.
Information Pages
Configuration Page
Font List
Statistics Page
Registration
Demo Page
Menu Map
Directory List
182
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Remark(s)
Each time your printer is switched on, it prints a
configuration page displaying the configuration
settings of the printer. This is particularly important
to verify the functionality of your printer and installed
options.
" #
You may disable printing a configuration page
by means of the control panel.
The printer prints a list of installed fonts with a
sample of each.
This page gives statistical information about the
usage of the printer and the current status of the
consumables.
This page shows the registration of the four colors
of your color printer in respect to each other.
This page displays a color demonstration page.
This page displays the menu map for the control
panel.
This page displays the directory list.
Inside Your Printer