Adding A Crown Port After Crown Print Monitor+ Installation - Konica Minolta magicolor 7300 Reference Manual

2
Select the Port Settings option and select port 9100.
3
Select OK and close the dialog box.
4
Restart your computer when prompted.
" #
If you are updating an existing monitor, turn your system off and on
again when prompted.
5
If you haven't already done so, install the printer driver for your printer
Adding a Crown Port after Crown Print
Monitor+ Installation
During Crown Print Monitor+ installation, the Add Crown Port dialog box is
automatically opened for you so you can add a Crown port to your PC's
configuration. You can use the following instructions to add a new Crown port
at any time following the Crown Print Monitor+ installation.
" #
The following assumes that Crown Print Monitor+ has already been
installed on your PC.
Windows XP/2000/NT4
1
From the Start menu, choose Settings.
2
Choose Printers.
3
In Printers window click the right mouse button.
4
In the Properties dialog box select the Ports tab.
5
Select the Add Port button.
6
Select the Printer Ports button.
7
Choose Crown Port from the list then select OK.
The Add Port window appears. Follow the instructions on the screen.
8
Select OK.
9
Choose Close in Printer Ports dialog box, then choose OK in Print
Server Properties to close the Printers window.
Windows Me/98/95
1
From the Start menu, choose Settings, and then Printers.
2
In the Printers window, click the right mouse button on an existing printer
to display the printer's menu.
3
Choose Properties to display the Properties dialog box.
Adding a Crown Port after
Crown Print Monitor+
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Installation
.
105