About Pjl; In This Section; Overview Of Pjl; Supported Pjl Command Set - Konica Minolta magicolor 7300 Reference Manual

About PJL

Printer Job Language (PJL) enables technical support and software
application developers to send commands to the printer and receive printer
status. This allows you to control the printer's configuration for a print job and
to establish two-way communications with the printer. In addition, PJL
commands can be used to change the printer's control panel settings and to
change the printing language from within applications.

In This Section

This PJL Reference Section contains information about the PJL commands
that are supported by your printer. Section 6.1 provides a general introduction
to PJL. Section 6.3 contains the full list of PJL commands supported by your
printer and describes the function of each command. If you have experience
using PJL commands, you can skip the remainder of this section and begin
with Section 6.2.

Overview of PJL

Using PJL to configure or to communicate with your printer requires the use
of PJL commands, which may include the use of PJL environmental
variables, modifiers, and parameter values to define the commands given.

Supported PJL Command Set

The following lists identify the PJL commands that are supported by your
KONICA MINOLTA printer.
" #
Additional information about each command is given in Section 6.4.
Kernel Commands
UEL
ENTER
PJL
280
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
About PJL