Setting Up Wired Networks; Option 4: Dhcp Method - Sony CMT-SBT300W Operating Instruction

Setting up wired networks

Option 4: DHCP method

Usually, the DHCP setting is set to ON when
you connect your computer to the network.
Try the following method if you are using a
wired network.
Set the DHCP setting of your computer to
ON in advance.
1
Check whether your computer
and router are turned on.
2
Connect the system and the
router using a network (LAN)
cable (not supplied).
3
Connect the router and your
computer using a second
network (LAN) cable (not
supplied) or a wireless LAN
connection.
Network (LAN) cable
(not supplied) or a
wireless LAN
connection
Network (LAN) cable
(not supplied)
4
Turn the system on.
lights up in the display  when the
connection is made.
38 GB