Setting The Automatic Standby Function - Sony CMT-SBT300W Operating Instruction

Setting the Automatic Standby function

This system is equipped with an Automatic
Standby function. With this function, the
system enters Standby mode automatically
in about 15 minutes when there is no
operation or audio signal output.
"AUTO STBY" appears in the display  for 2
minutes before the system enters Standby
mode.
By default, the Automatic Standby function
is turned on. You can turn off the function
using the option menu.
1
Press OPTIONS  to display the
setting menu.
 
2
Press /
select "AUTO STBY," then press
.
 
3
Press /
select "ON" or "OFF," then press
.
Notes
•
The Automatic Standby function is invalid for the
tuner function (FM/AM/DAB
have enabled it.
•
The system may not enter Standby mode
automatically in the following cases:
–
while an audio signal is being detected
–
during playback of audio tracks or files
–
while the preset Sleep Timer or Play Timer is
in process
•
The system counts down the time (15 minutes)
again until it enters Standby mode, even when
Automatic Standby function is enabled in the
following cases:
–
when a USB device is connected
–
when a button on the remote or unit is
pressed
* AM is available for CMT-SBT300W only, or DAB
is for CMT-SBT300WB only.
 repeatedly to
 repeatedly to
*
), even when you
55 GB