First Degree Fitness VX-3 Fluid rower Owner's Manual page 6

Step 4: Rower Seat Assembly
4x M6x20mm bolts and
4x M6 washers
Rower Seat
Install the Rower Seat onto the Rower frame using 4x M6x20mm bolts and 4x M6 washers.
Completed Rower Seat.
The seat must be mounted
exactly as shown.
The seat assembly is
placed into the seat rails
facing in the direction of
the arrow.
The seat indentation must
be towards the rear of the
machine.
Tip: Your seat when correctly assembled
should resemble a "Z"
CAUTION: The Rower Seat is heavy.
Use both hands and keep fingers
clear of rower channels when guiding
seat down the seat rails.
6
Rower Seat Frame
Indentation
Seat Frame
Neck
Indentation