Cleaning Capsule Cage; Descaling - Nespresso D300 Instructions For Use Manual

back. To introduce the drip tank properly, raise it
slightly and push backwards.
The capsule holder must be rinsed frequently.
Either run hot tap water through it or simply
insert the empty capsule holder in the spout ring
and let water run through it while slightly loosen-
ing and re-tightening the capsuleholder to vary
the pressure flow. Cleaning the capsule holder in
the dishwasher is not recommended (18).
For optimal cleaning of your capsule holder, a
specially conceived cleaning product is also
available from your NESPRESSO Club.
Clean the steam / hot water nozzle with a
clean, damp cloth after each use. If the nozzle
is blocked, unscrew it with the aid of a coin
and remove the residue causing the blocakage
with a needle. Take this occassion to remove
the integrated frothing attachement from the
bottom part of the steam nozzle by unscrewing
it with the help of a coin if necessary. Rinse all
of the parts in hot water (19).
When reconnecting the nozzle, ensure that the O-
ring joints are put back properly into place (20)!
Cleaning the Capsule
Cage (21-29)
The capsule cage is screwed into the bottom
part of the thermoblock inside the spout ring. In
order to clean it, follow the instructions below.
Turn off the machine and remove the water
tank, the drip tray and grill.
Let the machine cool down.
Turn the machine upside down (21).
Put the hexagonal key on the capsule holder
(22) and unscrew the capsule cage by turn-
ing the handle couterclockwise (23).
Finish unscrewing the capsule cage by hand (24).
Rinse the capsule cage under running water
(25). With the cleaning tool delivered with
the machine, clean the two holes on either
side of the water spout as well as the water
entry point of the capsule cage using the spi-
ral end of the cleaning tool (26).
WARNING ! Use the cleaning tool with
care since improper handling can cause
injury.
Blow through the capsule cage in the direction of
the arrow (27) in order to remove any deposits.
Clean the two holes of the water spout with
the cleaning tool a second time and blow
through the capsule cage once again.
Coat the threads of the capsule cage with
lubricant (28) and unsure that the stopper (A),
spring (B) and O-ring joint (C) are put back
properly into place (29).
Manually screw the capsule cage back into the
spout ring with the help of the hexagonal key.
Do not use the capsule holder to handle this
procedure !

Descaling

For the perfect functioning of your machine
and to maintain the optimum quality of your
espresso, we recommend that you descale
your machine regularly depending on the
water hardness of your region.
For further information, contact your
NESPRESSO Club who has products specially
conceived for this purpose available to you.
The machine is delivered with a hexagonal
key and cleaning tool that will be useful to
you in descaling the machine.
Warning! Never use vinegar which can
damage the joints of the machine.