Changing The Master And User Passwords In System Setup - Toshiba Satellite R10 User Manual

Using passwords in the Windows® operating system
8 Press
9 When System Setup prompts you to confirm your
change, Press

Changing the master and user passwords in System Setup

To change the master and user passwords in System Setup:
1 Click Start, then click Shutdown, and click OK.
The computer shuts down.
2 Hold down the
button until the on/off light on the system indicator panel
illuminates (green) for approximately one second. When
the following message appears on the screen: "Check
system, Then press [F1] key," press
The System Setup screen appears.
3 Press
screen.
4 Use the up and down arrow keys to select the password
you wish to change.
5 Press the spacebar, then enter the appropriate password
and press
6 If you want to change your password, input the new
password.
7 When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
password if a master password is registered.
8 Press
9 When System Setup prompts you to confirm your
change, Press
to save the change.
End
.
Y
key and press and hold the power
Esc
to move to the HDD PASSWORD section on the
H
.
Enter
. Note that you can only change (not delete) the user
to save the change.
End
.
Y
Keeping Your Files Safe
F1
.
Enter
191
.