106
Learning the Basics
Powering down the computer
Starting again from Hibernation
Use these instructions to restart the computer when you enter
Stand By mode by closing the display panel:
❖
AC power. Open the display panel.
❖
Battery power. Open the display panel and press the
power button until the on-off light changes to green.
The computer returns to the screen you were previously
using.
Using Stand By mode
If you are not connected to a Windows
(domain server), power down the computer using the Stand
By command as follows:
1
Click Start, Turn off computer.
The Turn off computer window appears.
Sample Turn off computer window with Stand By option
2
Click Stand By.
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power
mode. The on/off light (
machine is in Stand By mode.
If you are connected to a Windows
server), power down the computer using the Stand By
command as follows:
®
network server
) blinks amber indicating the
®
network server (domain