104
Learning the Basics
Powering down the computer
If you are connected to a Windows
server), follow these steps to power down the computer using
Hibernation:
1
Click Start, then Shut Down.
The Shut Down window appears.
2
Select Hibernate from the drop-down list of options.
3
Click OK.
The computer saves the state of the system, including all open
programs and files, to the hard disk, and then powers down
completely.
Configuring your computer for Hibernation
There are three other ways to put the computer into
Hibernation mode:
❖
By pressing the power button
❖
By closing the display panel
❖
By pressing the hotkey combination Fn+F4
This section describes how to set up your Hibernation options
for the first two methods. For information about the hotkey
combination, see
To set up your Hibernation options:
1
Click Start, Control Panel.
The Control Panel window appears.
2
Click Performance and Maintenance.
3
Double-click the Toshiba Power Saver icon.
The TOSHIBA Power Saver Properties window appears.
"Hibernation mode" on page
®
network server (domain
231.