7
Insert a fingertip in the battery pack recessed area.
8
Pull the discharged battery module out of the computer.
Removing the discharged battery
Inserting a charged battery
1
Wipe the terminals of the charged battery with a clean
cloth to ensure a good connection.
2
Insert the charged battery into the slot.
The battery has been designed so that you cannot install it
with reverse polarity.
If the battery is leaking or its case is cracked, put on protective
gloves to handle it, and discard it immediately following the
advice in
"Disposing of used batteries safely" on page
If the battery does not slide into the slot easily, remove the
battery and try again. Do not force the battery into position.
Mobile Computing
Changing the battery
123
126.