GE 15 Owner's Manual page 10

About storage drawer and cover removal.
Not all features are on all models.
10
Drawer and Cover Removal
Drawers can be removed easily by grasping
the sides and lifting up slightly while
pulling drawers past the stop location.
Full-Width Drawer with Plastic Cover
To remove the cover, lift it off its supports,
pull it forward, tilt it and take it out.
Twin Drawers with Glass Cover
To remove:
Remove the drawers.
1
Reach in, push the front of glass cover
2
up, and at the same time, pull it
forward as far as it will come.
Tilt it and take it out. Avoid cleaning the
cold glass cover with hot water because
the extreme temperature difference may
cause it to break.
Remove the drawer frame. (Always
3
remove the glass cover before you
take out the drawer frame.)
Lift the frame off the supports at each
side and back, pull it forward, tilt it and
take it out.
To replace:
Lower the frame until it rests on the
1
supports at each side and back.
Replace the glass cover, pushing its
2
rear edge firmly into the rear frame
channel and gently lowering the front
into place.
Replace the drawers.
3