Infinite Peripherals 216 User Manual page 48

3. PRINTER FUNCTIONS 3. PRINTER FUNCTIONS
[Description] Sets line spacing to [ n
inches.
[Notes] • The horizontal and vertical motion unit are specified by
GS P or GS $D0. Changing the horizontal or vertical motion
unit does not affect the current line spacing.
• The GS P or GS $D0 command can change the horizontal
(and vertical) motion unit. However, the value cannot be less
than the minimum vertical movement amount.
• In standard mode, the vertical motion unit is used.
[Default] n = 64
[Reference] ESC 0, ESC 2, GS P or GS $D0
[Example]
E E E E S S S S C C C C 4 4 4 4 n n n n
E S C 4 n
[Name] Set/reset italic mode
[Format] ASCII
Hex
Decimal
[Range] 0
[Description] Turns italic mode on or off, based on the following values of
n:
[Notes] • The printer can print any character in italic mode.
• When italic mode is turned off by setting the value of n to 0
or 48, the data which follows is printed in normal mode.
• Italic mode can also be turned on or off using ESC !. Note,
however, that the last received command is the effective one.
[Default] n = 0
[Reference] ESC !
[Example]
www.ipcprint.com
ESC 4
1B 34
27 52
n 1, 48 n 49
n
, 0 4 8 T r u s n
, 1 4 9 T r u s n
3- 21
(vertical or horizontal motion unit)]
n
n
n
F u n t c o i n
o i f f a t c i l m o d e
o i n a t c i l m o d e
KPM210/216