Troubleshooting - CDA hn6730 Manual For Installation, Use And Maintenance

In the event of a fault with the hob, please advise CDA Customer Care
of any fault code shown on the display
Contact CDA Customer Care
A: Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T: 01949 862 012 F: 01949 862 003
E: service@cda.eu W: www.cda.eu

Troubleshooting

On first use
You observe that Possible Causes What should you do?
The hob does not work and all Touch and hold the key lock key
The key lock is set
the displays show "L". to turn the key lock off.
Check that it is set up properly
The electrical connection of the
Installation blows a fuse. (see the Electrical Connection
hob is incorrect
section)
On switching on
You observe that Possible Causes What should you do?
Electrical connection fault. Check the power supply.
The hob does not work and the
Protection circuit breaker or fuse Replace the fuse or reset the
lights on the control panel do not
has tripped. circuit breaker.
switch on.
A small object, grease or water is Check the control keys are clean
on one of the control keys. and no objects are on them.
9 fast frying steaks
20