Table of Contents
Advertisement
To change the power level after it has been set
•
To increase the power level for a zone: After touching the "Power
key" for that zone, slide your finger along the slider toward the
right.
•
To reduce the power level for a zone: After touching the "Power
key" for that zone, slide your finger along the slider toward the left.
•
After 5 seconds the dot goes out and the power level is set.
To switch the power off
To switch off a single zone, After touching the "Power key" for that
zone, touch the left hand end of its slider. This will set the power level
to zero.
When all the zones are at zero, the hob will switch off automatically
after approximately twenty seconds.
Alternatively, to switch off the hob immediately, touch and hold the
"On/Off" key
Bridge function
This feature allows you to connect the front and back heating zones
on the left side of the hob together thus merging 2 zones into one
larger one. This is particularly useful for cooking with large pans.
Note: the "Booster" function is not possible when the "Bridge"
function is in use.
To set the bridge function
Touch the "Power keys" for the front and rear left zones at the same
time. The symbol " " will show against the power level display for the
rear zone. Use the slider to set the power level required.
for approximately two seconds.
11
Advertisement
Table of Contents
