Pause Function; Special Programmes - CDA hn6730 Manual For Installation, Use And Maintenance

Table of Contents

Advertisement

The heating level of the bridged zone is controlled just by using the
front left "Power key" followed by the slider.
To cancel the bridge function
Touch the "Power keys" for the front and rear left zones at the same
time again. The zone displays will show either "0" or "H" (residual
heat indicator).

Pause function

When one or more heating zones is active it is possible to pause
all cooking temporarily without losing the settings for the individual
zones. Cooking can then be resumed at the same settings when the
interruption is over. This is particularly useful when answering the
phone or other interruptions while cooking.
To set the pause function
Touch the pause key
zones turn off temporarily. They remain turned off until the pause
function is cancelled.
To cancel the pause function
Touch the pause key
Cooking will resume at the same settings as before the pause
function was activated.

Special programmes

The hob has an optional preset programmed heating level of 70°C
for each of the zones. This may be selected by touching the "Special
12
. The pause LED comes on and all cooking
, then within ten seconds touch the slider.

Advertisement

Table of Contents
loading

Table of Contents