Setup Utility
PCI/PnP System Configuration
The PnP/PCI System Configuration allows you to specify the
settings for your PCI devices.
PCI IRQ Setting ................................[ Auto ]
PCI Slot 1 .......................................... [--]
PCI Slot 2 .......................................... [--]
= Move Highlight Bar,
PgDn/PgUp = Move Screen, F1 = Help, Esc = Exit
PCI IRQ Setting
This parameter allows for auto or manual configuration of
PCI devices. If you use Plug and Play (PnP) devices, you
can keep the default setting
PnP devices. If your PCI device is not Plug and Play, you
can manually assign the interrupt for each of the device.
Refer to your manual for technical information about
the PCI card.
58
PnP/PCI System Configuration
INTA
INTB
[--]
[--]
= Change Setting
to automatically configure
Auto
Page 1/1
INTC
INTD
[--]
[--]
[--]
[--]
User's Guide