System Integration; Using Pelco Keyboard; Using Philips Allegiant Keyboard - Infinity ISE-XH30/36ZWDN650 FD Instruction Manual

SYSTEM INTEGRATION

9. SYSTEM INTEGRATION
The Dome Camera is allowed to be integrated into other suppliers' surveillance systems with large set of built-in
protocols. Refer to the following sections for more information.

9.1 USING PELCO KEYBOARD

The Speed Dome Camera can be controlled through a Pelco keyboard which built in with D protocol and P protocol.
Please follow the instruction to manipulate our speed dome by a keyboard with D and P protocols.
Function
Set Preset Number key + press and hold <Preset > button for three seconds.
Go Preset Number key + <Preset> to command a dome camera to go to a specific preset
position.
Display or hide an OSD 7 7 <Preset>
menu
Move the cursor in OSD Move the cursor up/down/right/left by pushing the joystick up/down/right/left respec-
menu tively
<ENTER> 7 7 <Preset>
Reset the dome camera 7 8 <Preset>
Cable Definition (P Protocol Keyboard to PTZ Camera)
62 | ISE-XH30(36)ZWDN650 FD
Instruction
Cable Definition (D Protocol Keyboard to PTZ Camera)

USING PHILIPS ALLEGIANT KEYBOARD

9.2
The Dome Cameras can be integrated into Philips Allegiant systems through D77R3 repeaters. Please follow the
instructions to control Dome Cameras through Philips Allegiant systems.
Symbol Definition
<shot> Command dome cameras to go to a specific preset position.
<set> Set preset position.
Special Function
7 6 <set> Exit the OSD menu directly.
7 7 <set> • Display or hide the OSD menu.
• A virtual key to issue an ENTER command when the OSD is displayed.
7 8 <set> Reset the doma camera.
<Iris Open> Send an ENTER command when the OSD is displayed.
Control Dome Camera Using Allegiant Keyboard
• Users can move the cursor left/right/up/down through pushing the joystick left /right/up/down.
• Users cannot issue the ENTER command directly. To enable the function, press " 7 7 <Set> ".
ENG
SYSTEM INTEGRATION
ISE-XH30(36)ZWDN650 FD | 63