Standard Pendent Mount; Wall Box Mounting - Infinity ISE-XH30/36ZWDN650 FD Instruction Manual

DOME CAMERA INSTALLATION
• Thread the cable(s) through the Outdoor Mount Kit and join the Indoor
• Mount Kit to the Compact Pendent Mount with the supplied screws and washers. Then adjust the Waterproof
Rubber to the joint.
• Connect the cable(s) to the Dome Camera.
• Join the Dome Camera to the Outdoor Mount Kit with the supplied screw and washers.
Wall Mounting: Compact Pendent Mount + Outdoor Mount Kit

STANDARD PENDENT MOUNT

7.4.2
ITEMS NEEDED:
• Dome Camera
• Outdoor Mount Kit (supplied)
• Data Cable (supplied)
• Ethernet Cable (network Dome Camera)
• Standard Pendent Mount and equipped items (optional accessory)
• Waterproof Rubber (supplied)
• M5 Standard/Security Screw (supplied)
• Screws and Screw Anchors for fixing the Standard Pendent Mount onto the ceiling (not supplied)
TOOLS NEEDED:
• Tool for drilling
• Tool for screwing
Follow the steps below to mount the Dome Camera with the Standard Pendent Mount.
Make a cable entry hole on the wall to recess the cables. Otherwise, users could push up the cable entry board on
the Standard Pendent Mount's mounting plate to place the cables (see the illustration Compact Pendent Mount).
Fix the Standard Pendent Mount on the wall with proper screws and screw anchors.
Attach the Waterproof Rubber to the Standard Pendent Mount.
Run the cable(s) through the Standard Pendent Mount with the Data Cable's 22-pin cable coming out of the outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount
52 | ISE-XH30(36)ZWDN650 FD
• Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor Mount Kit to the Standard Pendent
Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
• Connect the cable(s) to the Dome Camera.
• Join the Dome Camera to the Outdoor Mount Kit with the supplied screw and washers.
Wall Mounting: Standard Pendent Mount + Outdoor Mount Kit

WALL BOX MOUNTING

7.4.3
ITEMS NEEDED:
• Dome Camera
• Outdoor Mount Kit (supplied)
• Data Cable (supplied)
• Ethernet Cable (network Dome Camera)
• Standard/Compact Pendent Mount and equipped items (optional accessory)
• Wall Box Mounting (optional accessory)
• Waterproof Rubber (supplied)
• M5 Standard/Security Screw (supplied)
• Screws and Screw Anchors for fixing the Wall Box Mounting onto the ceiling (not supplied)
TOOLS NEEDED:
• Tool for drilling
• Tool for screwing
Follow the steps to mount the Dome Camera with the Standard/Compact Pendent Mount and Wall Box Mounting.
• Make a cable entry hole on the wall to recess the cable(s).
• Fix the Wall Box Mounting on the wall with proper screws and screw anchors. Then run the cable(s) through the
hole on the Wall Box Mounting with the Data Cable's 22-pin cable coming out.
• Fasten the Standard/Compact Pendent Mount onto the Wall Box Mounting with the supplied screws and wash-
ers. Then thread the cable(s) through the Standard/Compact Pendent Mount with the cable(s) coming out of the
Pendent Mount's outlet.
ENG
DOME CAMERA INSTALLATION
ISE-XH30(36)ZWDN650 FD | 53