Corner Mount; Corner Standard Mounting Plate; Corner Thin/Wide Box Mounting - Infinity ISE-XH30/36ZWDN650 FD Instruction Manual

DOME CAMERA INSTALLATION
NOTE: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount.
• Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.
• Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor Mount Kit to the Standard/Compact
Pendent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
• Connect the cable(s) to the Dome Camera.
• Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers.
Wall Box Mounting: Wall Box Mounting + Standard/Compact Pendent Mount + Outdoor Mount Kit

CORNER MOUNT

7.5
CORNER STANDARD MOUNTING PLATE/CORNER PLATE MINI
7.5.1
ITEMS NEEDED:
• Dome Camera
• Outdoor Mount Kit (supplied)
• Data Cable (supplied)
• Ethernet Cable (network Dome Camera)
• Standard/Compact Pendent Mount and equipped items (optional accessory)
• Corner Standard Mounting Plate/Corner Plate Mini (herein collectively called "Corner Mounting Plate"; optional
accessory)
• Waterproof Rubber (supplied)
• M5 Standard/Security Screw (supplied)
• Screws and Screw Anchors for fixing the Corner Mounting Plate (not supplied)
TOOLS NEEDED:
• Tool for drilling
• Tool for screwing
54 | ISE-XH30(36)ZWDN650 FD
Follow the steps below to mount the Dome Camera with the Corner Mounting Plate and Standard/Compact Pendent
Mount.
• Make a cable entry hole on the wall to recess the cable(s).
• Fix the Corner Mounting Plate on the corner of the wall with proper screws and screw anchors. Then run the
cable(s) through the hole on the Corner Mounting Plate with the Data Cable's 22-pin cable coming out.
• Fasten the Standard/Compact Pendent Mount onto the Corner Mounting Plate with the supplied screws and
washers. Then thread the cable(s) through the Standard/Compact Pendent Mount with the cable(s) coming out
of the Pendent Mount's outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount.
• Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.
• Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor Mount Kit to the Standard/Compact
Pendent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
• Connect the cable(s) to the Dome Camera.
• Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers.
Corner Wall Mounting: Corner Standard/Mini Mounting Plate +
Standard/Compact Pendent Mount + Outdoor Mount Kit

CORNER THIN/WIDE BOX MOUNTING

7.5.2
ITEMS NEEDED:
• Dome Camera
• Outdoor Mount Kit (supplied)
• Data Cable (supplied)
• Ethernet Cable (network Dome Camera)
• Standard/Compact Pendent Mount and equipped items (optional accessory)
• Corner Thin/Wide Box (optional accessory)
• Waterproof Rubber (supplied)
ENG
DOME CAMERA INSTALLATION
ISE-XH30(36)ZWDN650 FD | 55