Table of Contents
Advertisement
Sheet Feeder Mechanic
Paper Specifications
Single sheet
Storing conditions
Multilayer forms
Paper quality
8-2
Paper weight:
Paper width:
Paper length:
Temperature:
+ 18 °C to + 24 °C
Relative Humidity:
Multilayer forms can be used only with the glued edge on the top side of the form.
The glued edge should be possibly soft. Residual glue must not extrude from the
top edge. A curved glued edge may result in a desturbed paper transport.
Multiform sets must be placed into the insertion with the glued edge pointion
downward. They must be tested for proper operation.
Suitable for your printer are paper qualities with a low amount of wood, medium
fine papers, as well as papers with a quality mark SM-post or copying papers.
Not suitable are satinated or color coated papers, art papers as well as papers
with relief print.
Check paper before your printer is taken into operation!
2
60 - 90 g/m
(For sheets with the paper weight beyond this range
a functional test should be performed)
100 - 369 mm
(format selection range)
100 - 356 mm
45% to 60%
Specifications
Advertisement
Table of Contents
