Advertisement
Please Read and Save this Use and Care Book.
IMPORTANT SAFETY
INSTRUCTIONS
When using your iron, basic safety precautions should always be
followed,
including
the following:
0
READ ALL INSTRUCTIONS BEFORE USING.
0
Use iron only for its intended use.
0
To
protect against a risk of electric shock, do not immerse the
iron in water or other liquids.
0
The iron should always be turned to the minimum (min) setting
before plugging or unplugging from outlet. Never yank cord
to disconnect from the outlet; instead grasp plug and pull to
disconnect.
0
Do not allow cord to touch hot surfaces
.
Let iron cool completely
before putting away. Loop cord loosely around iron when storing
.
0
Always disconnect iron from electrical outlet when filling with
water or emptying, and when not in use.
0
Do not operate iron with a damaged cord, or if the iron has been
dropped or damaged. To avoid the risk of electric shock, do not
disassemble the iron; take it to a qualified service person for
examination and repair, or call the appropriate toll-free number
on the cover of this manual. Incorrect reassembly can cause a
risk of electric shock when the iron is used.
0
Close supervision is necessary for any appliance being used by or
near children. Do not leave iron unattended while connected or
on an ironing board.
0
Burns can occur from touching hot metal parts, hot water or
steam. Use caution when you turn a steam iron upside down or
use the surge of steam-there may be hot water in the reservoir.
Avoid rapid movement of iron to minimize hot water spillage.
0 The iron must be used and rested on a stable surface.
-
When placing the iron on its stand, ensure that the surface
on which the stand is placed is stable.
-
The iron is not to be used
if
it has been dropped,
if there are visible signs of damage or if it is leaking.
SPECIAL INSTRUCTIONS
0
To avoid a circuit overload, do not operate another
high-wattage appliance on the same circuit.
0
If an extension cord is absolutely necessary, a 15-ampere and
120-volt. or ?-ampere and 220-volt cord should be used
.
Cords
rated for less amperage may overheat. Care should be taken to
arrange the cord so that it cannot be pulled or tripped over.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the
other).
To
reduce the risk of electric shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant
screw to prevent removal of the outer cover. To reduce the risk of
fire or electric shock, do not attempt to remove the outer cover.
There are no user-serviceable parts inside. Repair should be
done only by authorized service personnel.
Note: If the power supply cord is damaged, it should be replaced
by qualified personnel or in Latin America by an authorized service
center.
Hide quick links:
Advertisement
