The Handy THS80 Assembly And Operating Instructions Manual page 4

STEP 2: Attach the Wheel Assembly Frame on each side of the Gear Box Axle and Fixing
Connecting Rod, insert two bolts M6x40 into the Fixing Connecting Rod through the Wheel
Assembly Frame. Make sure the hole in the Gear Box Axle is on the right side when assembling
as shown. Attach the Wheel Assembly Frames and Support Leg onto Hopper using bolts M6x70,
lock nuts M6 and Big Flat Washers Ø6. Note: The bolts and nuts needn't be tightened yet.
Make sure the hole in the Gear Box Axle is
on the right side when assembling as
shown.
Right Wheel
Assembly Frame
4
Left Wheel
Assembly Frame