Page 1
Instructions for use and warranty details Built In Oven Model No.: OMF6020...
Page 2
Once installation is complete, please read this instruction manual carefully and get to know the controls and the features of your new Kleenmaid appliance. These simple instructions will enable you to achieve excellent results from the very first time you use it.
Page 3
GENERAL WARNINGS This product is in compliance with the EU 2002/96/ and following the indications in this manual. EEC Directive. Important: do not lift or pull the oven with your The crossed out “wheeled bin” symbol on the appliance hands. indicates that at the end of its life-span, the product, as it In case of malfunctioning, disconnect the appliance from has to be separately treated from domestic waste, must...
Page 4
For installation of the oven see the “installation instructions” chapter Correct use of the oven – Pre-heat the oven for the strictly necessary time only – Open the door only when necessary to avoid unnecessary heat losses – Keep the gaskets clean and efficient to avoid heat dispersion which can cause damage –...
Contents Contents User instructions, 6 User instructions, First use, 6 Control panel, 7 First use, Control panel, Instructions for use: - conventional cooking, 7 Instructions for use: - fan cooking, 7 – conventional cooking, - defrosting, 7 – fan cooking, - grill cooking, 8 –...
User instructions Important: Before using the oven for the first time, allow it to operate empty and at maximum temperature for about 1 hour. Ventilate the room well, possibly by opening the windows. This will allow evacuation of the combustion fumes of manufacturing residues such as grease, oil and resin.
Control panel functions Instructions for use Function symbols on the selector Traditional static cooking + CLEAN Oven is Off. FUNCTION With the simultaneous heat distribution coming from above and below, this function is for baking food that requires slow cooking with the constant ...
Page 8
Defrosting fan POSITION OF THE INTERNAL GRILLS FOR SPECIFIC COOKING Select any oven function with fan and set temperature to “0”. The circulating air assists Frozen cakes, Long roasts, Turkey, Cakes, Meat Steak with defrosting frozen food placed in a tray in well done: Position n.
Page 9
Timer touch control Symbols This programmer has touch sensors which are used by pressing lightly in the area indicated by the and OK symbols Clock Setting the clock Once the power is connected, the symbol and the flashing 12:00 numbers appear on the display.
Page 10
Symbols Automatic functioning (with delayed cooking start) Press the OK symbol until the flashing appears, set the desired cooking time (with ). Using OK again, go to the flashing symbol and set the desired Clock cooking end time. The symbol switches off after a few seconds, the time will re-appear and the symbol switches on.
Replacing the oven light Instructions for removing and replacing the door To prevent electric shocks and/or damage to persons, read and follow the procedure given below: To remove 1 Open the oven door completely. WARNING: Ensure that the appliance is switched off 2.
Page 12
Removing the glass inside the oven door right near the clips A that lock the glass into place in the upper part of the door. Press until you hear a “click”, which General notes means that the clip has come out. Now lift the glass and take it out.
Maintenance and cleaning Disconnect the electric power supply before performing any type of maintenance on the product Do not clean the device with steam cleaners. Do not use rough, abrasive materials or sharp metal scrapers to clean the oven door, as they can scratch or damage the surfaces and cause the glass to break.
Page 14
Drip pan insertion (removable guide rails Make sure that the grill front is placed inside the end stops of the sliding guide rail (fig.3g). version) CAUTION use specific hand protection devices if these operations are performed with a hot oven, as the drip pan can be very hot.
Installation instructions The installation and technical assistance must only be performed by qualified staff. Carefully read the safety instructions in this manual before using the oven. Incorrect installation, maintenance, assistance and use can cause serious damage/injury to persons or objects This product must be installed as instructed in this manual and in compliance with National Standards and local regulations in force.
Assembly/replacement of the power Spare parts supply cable Only authorised components can be used for the appliance repairs. Do not repair or replace any oven component If the supply cord is damaged, it must be replaced by not recommended by this manual. All interventions and the manufacturer, its service agent or similarly qualified repairs must be carried out by authorised technical staff.
Page 17
ELECTRIC DATA FOR TYPE AND MODEL Voltage 220-230-240 V ~ 50/60 Hz FI- 60 Total power 2000 Top element Grill element 1800 Base element 1200 Circular element Oven light Oven fan Tangential fan Spit EXTERNAL DIMENSIONS Width 59,5 Height 59,5 Depth INTERNAL DIMENSIONS Gross Volume...
Purchase even though this warranty is in place will not bind Compass Capital Services trading as Kleenmaid to repair the appliance at no charge under this warranty and will require the Purchaser to pay for the service costs in full.
Page 20
Other products available in the Kleenmaid range of appliances Washing machines Clothes dryers Dishwashers Ovens Cooktops Steam ovens Microwave ovens Built in espresso coffee machines Rangehoods Freestanding ovens Compass Capital Services Pty Limited trading as Kleenmaid ABN 96138214525 Level 2, 204 Botany Road Alexandria NSW 2015 E: help@kmaid.com.au...
Need help?
Do you have a question about the OMF6020 and is the answer not in the manual?
Questions and answers