Repair Guide; Precautions In Disassembly And Reassembly - Hitachi C 6DC Technical Data And Service Manual

Cordless circular saw

Hide thumbs Also See for C 6DC:

Table of Contents

9. REPAIR GUIDE

[WARNING]

Without fail, remove the storage battery from the main body of the tool before starting repair or

maintenance work. If the battery is left in and the switch is activated inadvertently, the motor will start

rotating unexpectedly, which could cause serious injury.

The [Bold] numbers in the description below and the circled numbers in the following figures correspond to the

item numbers in the parts list and the exploded assembly diagram for the Model C 6DC.

9-1-1. Disassembly

(1) Removal of the Saw Blade [11]

While pressing the Lock Lever [23], turn the Bolt M7 x 17.5 [13] clockwise with the attached Box Wrench

10 mm [503] to fix the saw blade shaft. Turn the Bolt [13] counterclockwise with the Box Wrench [503] to

loosen it. Remove Washer (B1) [12], the Saw Blade [11], the Ring [10] and Washer (A1) or (A2) [9]. Handle

the Saw Blade with care to avoid injury. The Ring [10] is not provided for Australia and New Zealand (GD and

HD work).

Fig. 1

--- 10 ---

Table of Contents