Furuno FM-4721 Operator's Manual page 80

. INSTA ATION
3. Drill the four screw holes (approx. 2 mm in diameter) on the wall, then fasten the
Mounting racket to the wall using four self-tapping screws.
4. Put the Rubber Cap onto the Nut. The installation is now complete.
The extension cable can be cut and spliced, however care needs to be taken when
reconnecting the wires to ensure watertight integrity. efore cutting the cable make
sure it is not plugged into the radio. After you have cut the cable, note the following
wires:
ellow, reen, rown, Purple, lue, reen, Red , Shield
: The red wire and shield wire are wrapped in foil. Remove the foil, and separate the
red wire from the shield wire.
How to mo nt the handset cradle
Fasten the cradle to the mounting location with two
self-tapping screws. Set the handset in the cradle.
-7
www.busse-yachtshop.de | info@busse-yachtshop.de