How To Call On The Intercom; Bluetooth Operation (Option); Pairing - Furuno FM-4721 Operator's Manual

2. OPERATION
2.13.2

How to call on the Intercom

Press the [BELL] soft key on either the radio or a Handset to generate a calling beep
at the station called.
RAM1
RADIO
2.14

Bluetooth Operation (option)

Installation of the optional BU-1 Bluetooth Adapter Unit enables the FM-4721 to send/
receive voice messages with a BH-2A Bluetooth Headset via wireless links. When the
BH-2A is connected, [Bluetooth] appears in the [General Setup Menu].
2.14.1

Pairing

Before you use the BH-2A Bluetooth Headset, pair the BH-
2A Bluetooth Headset and the FM-4721 as follows:
1. Press and hold down the CALL/MENU key until the
[Setup Menu] appears.
2. Rotate the CH knob to select [General Setup] then
press the [SELECT] soft key.
3. Rotate the CH knob to select [Bluetooth] then press
the [SELECT] soft key.
4. Rotate the CH knob to select [PAIRING] then press the
[SELECT] soft key.
5. Bring the BH-2A Bluetooth Headset close to the FM-
4721, then press and hold the POWER switch on the
BH-2A until the LED indicator blinks red and blue alter-
nately.
6. Press the [ENT] soft key to initiate the pairing.
7. When the BH-2A is correctly recognized (approx. 20 to
30 seconds) by the FM-4721, the BH-2A's LED indica-
tor blinks blue, and "Pairing Succeeded" appears on
the display of the FM-4721.
8. Press the [QUIT] soft key several times to exit this
menu and return to radio mode.
Note: When the BH-2A is correctly recognized by the FM-4721, the
at the top right corner on the display.
2-14
www.busse-yachtshop.de | info@busse-yachtshop.de
RAM2 RAM1 RAM2 RAM1
RAM1 RADIO RAM2 RAM1
RAM2 RAM1 RAM2
RAM2 ALL
Daily Test
General Setup Menu
icon appears