Table of Contents
Advertisement
. INSTA
ATION
4 21
How to attach errite core
To suppress RF interference that can cause abnormal operation of the transceiver, at-
tach the supplied three ferrite cores to the Accessory Cable/Power Cable and Exten-
sion Cable, then snap its two halves together, as shown in the illustration below.
Attach each ferrite core as close as possible to the transceiver body, as shown. Final-
ly, wind some plastic tape around each ferrite core, to prevent vibration from causing
the two halves to split apart.
-4
www.busse-yachtshop.de | info@busse-yachtshop.de
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
