Disassembly Instructions - Kenmore 796.88842800 Service Manual

11

DISASSEMBLY INSTRUCTIONS

✽ Disassemble and repair the unit only after pulling out power plug from the outlet.
CONTROL PANEL ASSEMBLY
WARNING !
!
When you disassemble the control panel, be
sure to take gloves and careful panel frame's
edge. Failure to do so can cause serious injury.
1.
Remove 3 screws on the rear Panel.
2.
Pull the control panel forward.
3.
Open the cover protect.
4.
Disconnect connectors.
5.
Remove 5 screws.
6.
Disassemble the controller assembly.
28