Rear Brake Pads; Brake Fluid Inspection - KYMCO MXU 700i Owner's Manual

REAR BRAKE PADS

The clearance between the brake pads and brake
discs is adjusted automatically as the pads wear.
The only maintenance that is required is to replace
brake pads when they become worn. To check the
thickness of the brake pads use this procedure.
1.Remove a rear wheel.
2.Measure the thickness of each brake pad.
If the thickness of less than1.0mm(0.039in),take
your ATV to a KYMCO dealer to have brake pads
replaced.
3.Reinstall the wheel and tighten the lug nuts to
61N-m.
(2)
(1) Brake pad wear limit:
(2) Rear brakes

BRAKE FLUID INSPECTION

Check if the fluid level is below the lower level
mark through the inspection window.
1 1
(1) Lower level mark (Hand brake lever)
1 1
1mm(0.039in)
139
WARNING
L
(1)