Drive Select Lever - KYMCO MXU 700i Owner's Manual

DRIVE SELECT LEVER

The drive select lever is used to shift your ATV
into the low, high, neutral, reverse and park
positions. Refer to page 46 ~ 47
lever adjustment and operation.
NOTE:
Apply the rear brake and shift the shift lever
into P position before turning off the engine
when parking the vehicle on an incline if you
park on an incline with shift lever in H, L or R
position, vehicle weight will make it difficult to
shift into neutral.
(1)
for drive select
(1) Drive select lever
(L) Low
(H) High
(N) Neutral
(R) Reverse
(P) Park
34
(L)
(H)
(N)
(R)
(P)