Drive Select Lever Operation And Reverse Driving - KYMCO MXU 700i Owner's Manual

DRIVE SELECT LEVER OPERATION AND
REVERSE DRIVING
CAUTION:
Before shifting, you must stop the machine
and return the throttle lever to its closed
position until the engine speed to the
specified idling speed. Otherwise, the
transmission may be damaged.
NOTE:
Apply the rear brake and shift the shift lever
into P position before turning off the engine
when parking the vehicle on an incline if you
park on an incline with shift lever in H, L or R
position, vehicle weight will make it difficult to
shift into neutral.
Shifting: Neutral to high and high to low
1. Bring the ATV to a complete stop and return
the throttle lever to the closed position.
2. Apply the brakes, then shift by moving the
drive select lever along the shift guide.
(1)
(1) Drive select lever (L) Low
(H) High (N) Neutral
(R) Reverse (P) Park
NOTE:
Make sure that the drive select lever is
completely shifted into position.
63
(L)
(H)
(N)
(R)
(P)