How to View Station Information?
While playing a DAB+ program, press INFO repeatedly to display station information such as
station signal strength, program type, multiple name, program frequency, signal error rate,
time and date, etc
How to Start Manual Tune?
1. Press MENU à rotate TUNING knob to select < Manual tune >.
2. Press TUNING knob to confirm, the display will show the channel number and frequency
list.
3. Rotate TUNING knob scroll through the channels and press TUNING knob to select
preferred radio channel.
@
Note: If there is a multiplex corresponding to this channel and frequency, then the display will show
a tuning meter with the signal strength and the multiplex name after a few seconds.
4. Press TUNING knob to exit this order.
How to Set DRC (Dynamic Range Control) Value?
The DRC makes quieter sounds easier to hear when your radio is used in a noisy
environment.
1. Press MENU, and then rotate TUNING knob to select < DRC >, press TUNING to confirm.
2. Rotate TUNING knob to browse options: off/low/high.
@
Note:
a. Set DRC to off means no compression;
b. Set DRC to low indicates little compression;
c. Set DRC to high shows maximum compression.
3. Press TUNING knob to confirm your preferred option.
10