Table of Contents
Advertisement
DAB
Station list
1
Once the station list is created, you can select a station from it.
1
In DAB menu mode, select "Station list" (page 19), and
then press the SELECT button.
The list of available stations is displayed.
2
Turn the MULTI JOG to scroll through the stations in the
station list.
< Stations are displayed in alphanumeric order in the station list,
with numbers coming first.
3
When you find a station that you want to listen to,
press the SELECT button.
The station is tuned in and station information is displayed.
< If a station is no longer broadcasting or the unit is moved out of
the area of a broadcast station, the unit will no longer be able to
tune in the station. If the station cannot be tuned in, a question
mark "?" is displayed in front of the station name. If you select
this station to tune in, "Service not available" is displayed.
< You can move a station that is no longer available to the end of
the station list. See "Station order" on page 22.
< To display the station list while listening to a DAB station, turn
the MULTI JOG or press the Cursor button (
20
20
Using the DAB Menu (2)
/
).
Local scan (Auto scan)
2
If you move the unit to a new area or you want to check to see if
there are new stations available in your area, you can scan DAB
bands to find new stations.
The unit will scan the DAB bands between 10A to 13F and add the
stations found to the station list.
In DAB menu mode, select "Local scan" (page 19), and then
press the SELECT button.
The unit will scan for ensembles broadcast in the local area and
create the station list. The scan should take about 40 seconds.
Local scan
Stations: 0
Scanning
After broadcast services have been found the stations are listed
in alphanumeric order.
< If no broadcast services are found, please check the position of
the antenna.
/
Advertisement
Table of Contents
