Page 1
PR200DAB DAB+/AM/FM RADIO USER MANUAL IMPORTANT ! WARRANTY INFORMATION INSIDE. PLEASE READ www.teac.com.au Trademark of TEAC Corporation JAPAN...
Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service. If you require Warranty Service, please contact the TEAC Warranty Service Hotline at 1300 553 315 for assistance. Please ensure that you have the model number, serial number and purchase receipt ready when you call.
The serial number of the product is missing or has been tampered with. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment other than as stated in this warranty and outlined above.
Support and Service • Do not attempt to service this unit yourself. Please refer only to qualified service technicians. • For help and support with the installation/operation of the product, contact TEAC Australia at 1300 553 315. What’s in the Box 1.
Controls and Outputs FRONT AND BACK Part name Function Carry handle For portability Control panel Operate your radio with the buttons and dials on this panel Turn this dial to tune in to radio stations in FM and AM Tuning dial and pointer Radio Modes Headphone socket Connect earphones or headphones for private listening.
Controls and Outputs CONTROL PANEL Button/Part Function AUTO Press to start scanning for a list of DAB radio stations Press to enter the menu corresponding to the current MENU Mode Press to display information on the current DAB+ station. DISPLAY (Only used in DAB+ Mode) Press to access presets 6-10 (e.g.
Page 7
HOW TO USE: DAB+ Mode Switch to DAB+ Mode by pressing the DAB button. After switching to DAB+ for the first time, the radio will scan for channels automatically. This may take a few minutes. The first station in the list will play after the scan is completed.
CHANGE STATION ORDER 1. Press MENU to access the menu options 2. Press the LEFT/RIGHT / buttons until ‘Station Order’ is displayed. 3. Press SELECT to enter ‘Station Order’. 4. Use the LEFT/RIGHT / buttons to display the desired option. 5.
Page 9
• Dynamic Label Segment (DLS): the scrolling text information supplied by the station • Program Type (PTY): describes the type of program provided by the station • Multiplex Name: shows the multiplex that is broadcasting the program • Time and Date: displays the time and date, provided by the broadcaster •...
If a fault occurs, first check the list below before taking the radio for repair. If you cannot solve a problem, please contact TEAC at 1300 553 315. WARNING: DO NOT try to repair the unit yourself, as this will void the warranty.
Page 12
In the event of a product failure within the warranty period, please call the TEAC Warranty Service Hotline 1300 553 315 Between Monday to Friday - 8.30AM to 5PM AEST *Please have your purchase receipt and the product’s serial number ready For other enquiries and support please visit www.teac.com.au...
Need help?
Do you have a question about the PR200DAB and is the answer not in the manual?
Questions and answers