Fm Mode; How To Tune To Fm Mode; How To Search Programs; How To Start Scan For Available Station - Teac R5B User Manual

FM Mode

How to Tune to FM Mode?

How to Search Programs?

1. Once in FM mode, it will start at the beginning of the FM frequency range (87.50MHz).
Otherwise, it will play the last FM station you were listening to.
2. Manual Scan
Slowly rotate TUNING knob to change frequency by 0.05MHz per step.
3. Automatic Scan
Press TUNING knob.

How to Start Scan for available station?

1. By default, FM scans stop at any available station. This may result in a poor signal-to-
noise ratio (hiss) from weak stations.
2. To change the scan settings to stop only at stations with good signal strength, press
MENU à < Scan setting > à 'Strong stations only?' press TUNING knob to
confirm.

How to Change Audio Setting?

1. By default, all stereo stations are reproduced in stereo. For weak stations, this may
result in a poor signal-to-noise ratio (hiss).
2. To play weak stations in mono, press MENU à < Audio setting > à Forced mono,
press TUNING knob to confirm.

How to View Station Information?

@
Note: only available for DAB+ and FM mode.
While listening to a DAB+/FM program, you can view station information by pressing
INFO repeatedly. The information is displayed on the second line of the display.
1. Press FUNCTION to switch from DAB+ Mode to 'FM
Mode'.
12