Set Alarm - Teac R5B User Manual

Set Alarm

@
Note: Ensure that time is set correctly before setting the Alarm.
1. Press ALARM1 to select 'Alarm 1 Setup', with alarm1 icon blinking.
2. Or press ALARM2 to select 'Alarm 2 Setup' mode, , Let's take Alarm1 setup for example
3. Press TUNING Knob to enter 'Alarm 1 Wizard', follow the radio's display instructions to
configure the following parameters:
∗
On time: 06: 00 (alarm sounding time)
∗
Source: Buzzer/DAB/FM
Alarm sounds frequency: Daily, Once, Weekends or weekdays
∗
∗
Alarm volume: turn TUNING knob to your favor alarm volume, and then press
TUNING knob to confirm, your radio will indicate 'Alarm saved'.
Repeat above 3 steps for Alarm 2 Setup settings
To Operate SNOOZE
When Alarm wake up, press SNOOZE/DIMMER to postpone alarm for 5 minutes, or
l
press SNOOZE/DIMMER repeatedly to select your desired snooze time.
•
While in SNOOZE function, your radio is in standby mode and continue to countdown,
During this time you can press STANDBY/ON to stop snooze, or press STANDBY/ON
again to have your radio play.
•
When radio reached SNOOZE time, it will be sound again.
To Turn Off Alarm
1. To turn alarm off temporarily, press STANDBY/ON.
2. To turn alarm off permanently, press corresponding alarm button: ALARM1 or
ALARM2, and then rotate TUNING knob to ' Alarm Off', press TUNING knob to
confirm and it displays 'Alarm saved'.
Volume Control
Adjust the radio volume by turning Volume knob.
16