Dab+ Mode; How To Turn On; How To Change To Another Station; How To Prune - Teac R5B User Manual

DAB+ Mode

How to Turn on?

1. Place the unit on a flat stable surface and extend the telescopic aerial to ensure best
reception in both DAB+ and FM modes. Connect the power adaptor to the DC jack on the
rear of the unit, and press
Radio' will be followed.
2. For initial use, it will automatically run a full scan and save all the detected stations into
memory. Once the scanning completed, the first station in its station list will be selected
for listening

How to Change to another Station?

How to Prune?

@
Note: Pruning removes inactive stations from the station list
Press MENU à rotate TUNING knob to select 'Prune', press TUNING knob to confirm,
1.
'Prune? <No> Yes'.
2. Rotate TUNING knob to 'Yes', press TUNING knob to confirm.

How to Update Stations List?

@
Note: It's recommended to do a full scan every now and then to add any new stations to the
station list
Press MENU àpress TUNING knob to select 'Full scan', the unit will scan all the DAB+
channels and add any new stations available to its station list.
STANDBY to switch it on. A message -- 'Welcome to Digital
@
Note: a. if no DAB+ signal is found in your area, relocate your
radio and perform another scan
1. While playing a DAB+ program, you can change to
another station by rotate TUNING knob to browse.
2. Press TUNING knob to confirm the program you
selected.
9