Setting Up Your Dab Tuner; Auto Tuning - Teac SR-L30DAB Owner's Manual

Setting up your DAB Tuner

The first time you turn on the unit, it will
scan for DAB channels and build a channel
list.
Press the POWER switch to turn the unit
on.
The following screen will display for 2
seconds.
The unit will scan for broadcast services in
the local area and add them to the channel
list as they are found. The scan should take
about 10 seconds.
As channels are added to the channel list the
number of channels found is displayed.
After broadcast services have been found the
channels are listed in alphanumeric order.
> If no broadcast services are found, please
reorient the antenna.
8

Auto Tuning

If you move the unit to a new area or you
want to check to see if there are new
channels available in your area, you can scan
to find new channels automatically.
Press the AUTO TUNING button.
The unit will scan for any new channels and
add the channels found to the channel list.
> Press and hold the AUTO TUNING button
for longer than 2 seconds to activate
international search.