Dab; Listening To The Dab Radio; Using The Dab Menu - Teac R-4iDNT Owner's Manual

DAB

Listening to the DAB Radio

Setting up your DAB tuner
When the unit is switched to DAB mode for the first time, the
automatic tuning process will start and create a station list.
(Autoscan: local scan)
< After the first time, when the unit is switched to DAB mode, the
last station listened to will be tuned in again.
Autoscan: Local scan (10A to 13F)
Press the MODE button repeatedly to select "DAB radio".
DAB
radio
< You can also use the FUNCTION button (
control unit to select "DAB".
The unit will scan for ensembles broadcast in the local area and
create the station list. The scan should take about 40 seconds.
Local scan
After broadcast services have been found the stations are listed
in alphanumeric order.
< If no broadcast services are found, please check the position of
the antenna.
Autoscan: full scan (5A to 13F)
If you want to search stations internationally, press the SCAN
button while DAB is selected as the source.
Try this if "Local Scan" does not find the stations you want.
The unit will scan for ensembles broadcast in the DAB bands
and create the station list. The scan should take about
50 seconds.
Full scan
< You can also select and activate "Local scan" and "Full scan" in
the DAB function control menu (page 20, 21).
/ ) on the remote
˙ ¥
Stations: 0
Scanning
/
Stations: 0
Scanning
/
DAB

Using the DAB Menu (1)

In DAB mode, use DAB menu to access various functions.
1
In DAB mode, press and hold the MENU button for
more than 2 seconds.
more than 2 sec.
2
Turn the MULTI JOG to find the desired menu.
DAB
Station list
Local scan
Full scan
Manual tune
DRC
< You can also use the Cursor buttons (
control unit to scroll through menu items.
DAB menu items
1 Station list
Local scan
2
Full scan
3
4 Manual tune
5 DRC (Dynamic Range Compression)
6 Station order
Main menu
7
For the detail of each item, see following pages.
Hold down
>
>
>
/ ) on the remote
19 19