Angelcare AC601 Owner's Manual

Angelcare AC601 Owner's Manual

Simplicity movement sensor with sound baby monitor
Hide thumbs Also See for AC601:

Advertisement

OWNER'S MANUAL
SIMPLICITY MOVEMENT SENSOR
WITH SOUND BABY MONITOR
Model AC601
IMPORTANT ADVICE FOR INITIAL SETUP
Movement Alarm
Your monitor comes with the movement alarm activated.
When switching on your monitor it will alarm, with or without
the Sensor Pad plugged in, if no movement is detected.
Deactivate the movement function to use the monitor without
the Sensor Pad.
Batteries
Insert the enclosed rechargeable batteries into the Parent
Unit. If inserted incorrectly the Parent Unit will not charge
when placed in the charging cradle. The charging indicator
lights will flash to indicate charging.
Cord Safety
Ensure the Nursery Unit is at least 1 metre away from your
baby's cot. The Sensor Pad cord must always be kept out of
reach of baby and secured using the cord cover kit provided.
Voice-activated Sound Transmission
Your monitor will transmit when it detects sound from
your baby or in their room. You can adjust the microphone
sensitivity to suit your needs.
PLEASE FOLLOW THE INSTRUCTIONS CAREFULLY FOR CORRECT SETUP
Please DO NOT return this product to the store. For assistance please
contact our helpline on 0845 009 1789 or email helpline@babyhelpline.co.uk
Mon – Fri 10am – 4pm, excluding bank holidays.
for your peace of mind

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AC601 and is the answer not in the manual?

Questions and answers

Summary of Contents for Angelcare AC601

  • Page 1 OWNER’S MANUAL SIMPLICITY MOVEMENT SENSOR WITH SOUND BABY MONITOR Model AC601 IMPORTANT ADVICE FOR INITIAL SETUP Movement Alarm Your monitor comes with the movement alarm activated. When switching on your monitor it will alarm, with or without the Sensor Pad plugged in, if no movement is detected.
  • Page 2: Table Of Contents

    DO NOT short-circuit supply This Angelcare Monitor is a Personal Care Product. Please DO NOT return this to the store terminals. ONLY use the recommended where you purchased it from. If you have any questions or require assistance please call the 7.
  • Page 3 Sensor Pad all persons and must not be collocated or from the product. measuring at least 33 x 33 cm and 6 mm operating in conjunction with any other thick. Only use your Angelcare ® monitor in antenna or transmitter.
  • Page 4: Parts List

    17.3 However, there is no guarantee that batteries at the same time as well. DO interference will not occur in a particular NOT mix old and new batteries. 1 Sensor Pad (AC601) with pre-installed cord covers Parent Unit Nursery Unit installation. If this equipment does cause harmful interference to radio or television 16.12 Reverse polarity installation of the...
  • Page 5: Step 1 - Charging The Parent Unit (15 Hours)

    STEP 1 - CHARGING THE PARENT UNIT (15 HOURS) NURSERY UNIT BATTERY ALARM • Low Battery Indicator flashes when batteries need to be changed. IMPORTANT • If the batteries are not replaced, the monitor will stop working. Never use regular alkaline batteries in the Parent Unit;...
  • Page 6: Step 2 - Installing The Sensor Pad

    STEP 2 - INSTALLING THE SENSOR PAD 2.2 - SELECT THE CRIB LEG YOU WILL BE USING TO SECURE THE CORD COVERS RECOMMENDED Use the crib leg by the wall closest to Cord covers 1, 2, 3, 4: the Nursery Unit (Fig 1). In cases where Position on floor the Nursery Unit is across the room, use Cord cover 4:...
  • Page 7: Step 3 - Setting Up The Nursery Unit

    STEP 3 - SETTING UP THE NURSERY UNIT 8 cm 1) Remove the battery cover and insert 4 AAA Alkaline Batteries ( not included). 6) Place the 6 cord cover approximately 8 cm from the edge of the mattress 2) Place the Nursery Unit at a minimum support.
  • Page 8: Step 4 - Turning On Your Monitor

    STEP 4 - TURNING ON YOUR MONITOR STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR 5.1 - SENSOR PAD 1) Slide ON Parent Unit Volume/Power button. TO TEST THE SENSOR PAD: 2) Push Nursery Unit Power ON/OFF button for 2 seconds. 3) Set both Units on the same channel 1) Move your hand lightly on the mattress.
  • Page 9: Out Of Range

    TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL: OUT-OF-RANGE ALARM Turn the Nursery Unit sensitivity dial from less • Alarm activates when your two units are not communicating. sensitive (0) to very sensitive (5). • The Parent Unit will emit a double beep every 8 seconds. NOTE: If you are experiencing false alarms, IMPORTANT...
  • Page 10: Troubleshooting

    ® rechargeable, movement and sound monitor (model AC601) is free from any material and workmanship • Avoid contact with the crib when the monitor is ON. defects, for a period of one (1) year (rechargeable batteries not included) from the date • Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement...
  • Page 11: Technical Specifications

    Caution: To reduce the risk of electric for North America/Ecuador/Oceania. shock, do not expose this product to rain or moisture. Hereby, Angelcare Monitors Inc, declares this baby monitor is in compliance with the Danger of explosion if batteries are essential requirements and other relevant incorrectly replaced.
  • Page 13 This Angelcare Baby Monitor is a Personal Care Product. Please DO NOT return this to the store, but contact us initially for advice and assistance: Angelcare Helpline on 0845 009 1789 Website: www.angelcare.co.uk Email: helpline@babyhelpline.co.uk NOTE: Helpline is open Monday to Friday, 10am to 4pm, excluding bank holidays.

Table of Contents

Save PDF