AEG CTV 4894 DVB-T/DVD Instruction Manual page 72

English
72
Preset
05-CTV 4894_GB.indd 72 05-CTV 48 _GB.indd 72
Copy
In this menu you can copy a TV channel to another channel position.
1. First set the channel which she would like to copy. Now call up the
analogue OSD menu and select the „Copy" option.
2. Use the cursor buttons ( / ) to select the channel position to which
the selected channel should be copied (e.g. 2 ).
3. Then press the cursor button ( ) to select the channel to be copied.
4. For example 2 3 is shown in the display. In this example, the
channel is copied from position 3 to position 2 by pressing the cursor
button ( ).
Auto Search
Press the cursor button ( ) to start the automatic channel search. The
device now searches for all available channels. This process can take a
few minutes.
Search
Start the manual search to the next or previous channel by pressing the
cursor buttons ( / ). The channel found is automatically stored in the
current channel position.
Fine
In this menu you can adjust the frequency of the current channel upwards
or downwards (fi ne adjustment).
Band
Here you can set the corresponding frequency band.
Position
Here you can select the channel whose settings you wish to change.
Skip
In this menu you can determine whether the current channel should be
skipped when switching over.
Off : The current channel is not skipped.
On: The current channel is skipped.
20.03.2008 12:01:18 Uhr 20.03.2008 12:01:18 Uhr