AEG CTV 4894 DVB-T/DVD Instruction Manual page 64

English
64
Analogue Output Setup
Dolby Digital Setup
05-CTV 4894_GB.indd 64 05-CTV 48 _GB.indd 64
Closed Captions
Some DVDs contain commentaries that accompany the fi lm, e.g. subtitles
for the hard of hearing.
On: The commentary is displayed.
Off : No commentaries are displayed.
Screen saver
The player is able to display a still image for any time on the screen. This
can cause damage to the screen. It is therefore recommended to activate
the screen saver.
The following options are available:
On: The screen saver is activated (default setting).
Off : The screen saver is deactivated.
Last Memory
Here you can defi ne how the DVD player should behave if the user presses
the „STOP " button (Fig. 3/20) during playback.
On: If the playback of a DVD, CD or VCD is stopped and then restarted,
playback begins from the previous position.
Off : If the playback of a DVD, CD or VCD is stopped and then restar-
ted, playback begins from the beginning of the medium.
Downmix
Change the characteristics of the speaker output:
LT/RT: Choose this setting if you want to play the DVD with the Pro
Logic Dolby stereo eff ect. This produces a almost real 2-channel replay
eff ect.
Stereo: Choose this setting if you want to play a DVD, that has been
produced in the 5.1-Audio format, as 2-channel stereo sound.
Dual Mono
The Audio output is normally in stereo. Here you have the possibility to
choose Mono-output instead of Stereo-output.
Stereo: The Audio output is in Stereo (default).
L-Mono: The Audio output is in Mono. In this case the signal of the
„left" stereo channel is transmitted to all speakers.
R-Mono: The Audio output is in Mono. In this case the signal of the
„right" stereo channel is transmitted to all speakers.
Mix Mono: The Audio output is in Mono. In this case the signal of the
„both" stereo channel is transmitted to all speakers.
20.03.2008 12:01:14 Uhr 20.03.2008 12:01:14 Uhr