Playing Media - AEG CTV 4894 DVB-T/DVD Instruction Manual

English
56
Using the remote control
Loading a CD/DVD
Understanding the
onscreen CD-menu
Understanding the
onscreen DVD-menu
Starting the replay
05-CTV 4894_B.indd 56 05-CTV 4 _GB.indd 56

Playing media

You transmit commands to the DVD-Player via remote control. It is thus
important to point the end of the remote control towards the DVD-Player.
1. Press the SOURCE button (Fig. 3/14) to select the DVD mode.
2. Insert a CD or DVD into the drive. The CD is automatically drawn.
3. The word „Loading" appears briefl y in the display.
ATTENTION:
With this device it is possible to play back only 12 cm discs!
NOTE:
The CD/DVD is only drawn in if the device is turned to DVD mode.
Insert the CD/DVD into the drawer with the cover facing forwards.
When playing CDs you can view the on-screen menu by pressing the
DISPLAY-button (Fig. 3/13).
Current track/total number of tracks (1).
Time (2): This provides information about the duration and the
remaining play time. By standard the play time expired of the current
track is displayed. The display is in hours, minutes and seconds. Press
the DISPLAY-button (Fig. 3/13) once or several times to have further
times displayed.
The following possibilities are available for selection
- time remaining to the end of the track,
- playback time of the CD so far,
- time remaining to the end of the CD.
When playing DVDs you can view the on-screen menu by pressing the
DISPLAY-button (Fig. 3/13).
DVD-menu
Current title/total number of titles (1).
Current chapter/total number of chapters (2).
Time (3): This provides information about the duration and the
remaining play time. By standard the play time expired of the current
title is displayed. The display is in hours, minutes and seconds. Press
the DISPLAY-button (Fig. 3/13) once or several times to have further
times displayed. The following possibilities are available for selection
- time remaining to the end of the title,
- expired playing time of the chapter,
- time remaining to the end of the
Insert the CD or DVD into the drive ➯ Page 56, „Loading a CD/DVD".
Press the „ II"-button (Fig. 3/21) on the remote control.
NOTE:
If the replay does not start or the replay is of poor quality, you should
check the default settings of the DVD-Player.
chapter.
20.03.2008 12:01:10 Uhr 20.03.2008 12:01:10 Uhr