AEG CTV 4894 DVB-T/DVD Instruction Manual page 63

Overview of the main menu
System settings
05-CTV 4894_GB.indd 63 05-CTV 48 _GB.indd 63
General Setup (1)
Audio Setup Page (2)
Dolby Digital Settings (3)
Preference Page (4)
Password Setup Page (5)
DVB-T Settings (6)
NOTE:
Some of the menu settings are only available in stop mode (depen-
ding on the DVD).
TV Display
Here you can adapt the output of the DVD-Player to the TV-aspect.
Concerning the background: If you do not have a wide screen TV the
TV-aspect will be 4:3. However, most feature fi lms have an aspect of 16:9,
the image is therefore too wide for the TV-screen.
Here you can specify how the replay of the fi lm is to be adapted to the
playback device:
4:3 Panscan: You will only see the middle section of the fi lm. The bor-
ders will be cut off .
4:3 Letterbox: You will see the complete width of the fi lm. The fi lm is
thus reduced in size, whereby black bars appear below and above the
fi lm
16:9 Wide: Select this option if you use a wide screen TV for replay.
Please note that fi lms, that have been recorded with TV-aspect 4:3
can still be replayed using aspect 4:3. This means, that replaying this
fi lm will not require the complete wide screen area of the television.
NOTE: The setting „4:3 Panscan" is not supported by all DVDs.
Angle Mark (Camera Angle)
If the DVD contains sequences recorded from diff erent camera angles you
can use the ANGLE/TTX button (Fig. 3/4) to select the various camera
angles. This function is only available if the DVD contains scenes with
various camera angles.
Before you can use this function it has to be activated.
On: The angle symbol is shown on the screen.
Off : No angle symbol is shown on the screen.
OSD Language
Here you can select the language of the on-screen displays.
English
63
20.03.2008 12:01:13 Uhr 20.03.2008 12:01:13 Uhr