Daewoo SD-9100 Owner's Manual page 25

DV6T712D-AQ/I(GB) 02.11.12 5:39 PM
Tuning in New Stations
Station names
I If your player is showing no station name or is showing a station name incorrectly, you can correct
this.
• Should you wish to
tune in all the
channels available in
your region, please
refer to page 16.
• Should you wish to
sort or clear stations,
please refer to page
24.
Sorting programme locations
If the location numbers used for programmes stored in your TV and player are different, you can change them on
the player. To do this, move the stations to the right numbers, until they are arranged the way you want.
Clearing programme locations
24
˘ ` 24 mac001 300DPI 120LPI
Call this menu (just see the previous page),
1
if it isn't displayed.
Select NAME position.
Press the [0] button to change the given name.
Or press the [1] button to create the station name.
Either select the name from the stored list or you
2
create the station name and enter a 4-digit name.
Change the letters with the [PR +/–] buttons,
move to the next letter with the [< / >] buttons.
3
Store and exit.
1
1
Call the player's "MAIN SETUP",
choose "PR PRESET" then "PR ALIGN".
2
2
Select the programme to swap.
Confirm by pressing OK button.
Move the station to the desired location number.
Confirm by pressing OK button.
1
1
Call the player's "MAIN SETUP",
choose "PR PRESET" then "PR ERASE".
2
2
Select the station (location number) you want to clear.
Review the picture by pressing [>] button.
Clear by pressing OK button.
MANUAL SET
PR 01
RECEPTION AERIAL
AUTOSEARCH CH01
FINE TUNING
DECODER ON
NAME _ _ _ _
PR+/-: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM SETUP:END
MANUAL SET
PR 01
RECEPTION AERIAL
AUTOSEARCH CH_ _
FINE TUNING
DECODER ON
NAME O_ _ _
PR+/-: SELECT CHARACTER
</>
: SELECT POSITION
OK:CONFIRM SETUP:END
MANUAL SET
PR01 ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
PR ALIGN
PR01ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:ALIGN
:PR VIEW
<
OK:CONFIRM SETUP:END
PR ERASE
PR01 ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:SELECT
:PR VIEW
<
OK:ERASE SETUP:END