Daewoo SD-9100 Owner's Manual page 23

DV6T712D-AQ/I(GB) 02.11.12 5:39 PM
Recording
To Copy From DVD To Videotape
To copy just
with buttons of
remote control, after
playing DVD, press
[VCR] button and
then [REC] button.
One Touch timer Recording (OTR)
I When your urgent business happens suddenly in watching TV or you want to record the current TV
program for the desired time, follow the procedures below.
22
˘ ` 22 mac001 300DPI 120LPI
1
1
Insert the desired DVD disc.
When it is a DVD disc with copy protect function, you can't copy it.
Insert a recordable tape.
2
2
Press [QUICK COPY] button on the front panel.
DVD plays and VCR starts recording.
3
3
To exit copy, press [VCR] button and then [ ] button.
If not, DVD plays again and video continues to copy.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
1
1
First, follow the steps 1 to 4 in "Recording With VCR".
2
2
Press [REC] button as much as you want. See the "Recording Times Table"
below.
Once continuous recording until you press STOP button
Twice recording for 30 mins from current time
3 (times) recording for 1 hour
9 recording for 4 hours
10 returning to the status of Once Press
3
3
To stop Recording mode, press [STOP] button more than 8 seconds.