Sony Handycam DCR-SR20 Operating Manual page 36


Confirm that your camcorder is
not connected to the computer.
 Turn on the computer.
Log on as an Administrator for

installation.
Close all applications running on the

computer before installing the software.

Place the supplied CD-ROM in the
disc drive of your computer.
The installation screen appears.
If the screen does not appear, click

[Start]  [Computer] (in Windows
XP, [My Computer]), then double-click
[SONYPMB (E:)] (CD-ROM)
Drive names (such as (E:)) may vary
*
depending on the computer.
 Click [Install].
 Select the country or region.
 Select the language for the
application to be installed, then
proceed to the next screen.
 Read the terms of the license
agreement carefully. If you agree
to the terms, change
then click [Next]  [Install].
US



.
*


to , and
Turn on your camcorder, then
connect the camcorder to the
computer using the supplied USB
cable.
The [USB SELECT] screen appears on
the camcorder screen automatically.
Select the one of the media types
displayed on the screen to make
the computer recognize your
camcorder.
[ USB CONNECT]: Internal hard
disk (DCR-SR20)
[ USB CONNECT]: Memory card
The displayed recording media differ

depending on the model.
If the [USB SELECT] screen does not

(MENU)  [Show
appear, select
others]  [USB CONNECT] (under
[OTHERS] category).
Click [Continue] on the computer
screen.
Follow the on-screen instructions
to install the software.
Depending on the computer, you may

need to install third party software. If
the installation screen appears, follow
the instructions to install the required
software.
Restart the computer if required to

complete the installation.