Step 2: Turning The Power On, And Setting The Date And Time - Sony Handycam DCR-SR20 Operating Manual

Step 2: Turning the power on, and setting the
date and time
1
Open the LCD screen of your camcorder.
Your camcorder turns on.
2
Select the desired geographical area by selecting
multi-selector, keep pressing the center of the multi-selector until the
desired geographical area is turned on a light.
Multi-selector
See page 18 for the detail of the using the multi-selector.

To set the date and time again, operate the multi-selector to select

others]  [CLOCK/
item is not on the screen, select
3
Select [NEXT] with  of the multi-selector, then press the center of the
multi-selector.
4
Select setting of [DST SET] or [SUMMERTIME] with / of the multi-
selector, and press the center of the multi-selector.
US
1
POWER lamp
[GENERAL SET] category)  [CLOCK SET]. When an
LANG] (under
/ until the item appears.
with / of the
/
(MENU)  [Show