Taking A Phone Call - Pioneer DEH-P65BT Operation Manual

Section
02 Operating this unit
Preset number
Numbers that you dial frequently can be as-
signed to presets for quick recall.
Refer to Assigning preset numbers on page 31
for how to assign a number to a preset.
1 Push MULTI-CONTROL up or down to
select a preset number.
# You can also press one of the preset number
buttons 1 to 6 to select a number.
# You can also recall preset numbers P1 to P10
by pressing 0 to 9 on the remote control.
# If the number is already in the Phone Book
then the name is also displayed.
# NO DATA is displayed for preset numbers
that have not been assigned.
2 Press MULTI-CONTROL to make a call.
# You can also perform this operation by press-
ing OFF HOOK on the remote control.
Voice recognition
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
! Operation varies depending on the type of
your cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
! This function can be operated only when
the connection is established with HFP
(Hands Free Profile).
1 Press BAND and hold until VOICE ap-
pears in the display.
VOICE appears in the display. When
VOICE DIAL ON is displayed, voice recogni-
tion function is now ready.
# If your cellular phone does not feature voice
recognition function, NO VOICE DIAL appears in
the display and opearation is not available.
2 Pronounce the name of your contact.
22
En

Taking a phone call

Answering an incoming call
Even when a source other than TELEPHONE is
selected or when this unit is turned off, you
can still answer incoming calls. If you set this
unit to automatically answering incoming
calls, refer to Setting the automatic answering
on page 32.
1 When a call comes in, press
MULTI-CONTROL.
# You can also perform this operation by press-
ing OFF HOOK on the remote control.
# If the private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
2 To end the call, press PHONE.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
# You may hear a noise when you disconnect
the phone.
# You can also perform this operation by press-
ing ON HOOK on the remote control.
Rejecting an incoming call
You can reject an incoming call. To reject all
incoming calls automatically, refer to Setting
the automatic rejecting on page 32.
% When a call comes in, press PHONE.
The call is rejected.
# The rejected call is recorded in missed call
history list. About the missed call history list,
refer to Using the Call History on page 30.
# You can also perform this operation by press-
ing ON HOOK on the remote control.